SOHC.co.uk Forums > CB350/400

Oil Gallery Tube

<< < (2/2)

McCabe-Thiele (Ted):

--- Quote from: Bryanj on April 13, 2021, 05:54:00 PM ---Probably happened during machining, as long as no loose bits it will be fine

--- End quote ---

I've removed the potentially loose bits and the debris I made in the process. I used to have a selection (3) of bearing scrapers from back in the day when you hand finished white metal bearings probably on the likes of an Austin 7 - they were my late fathers from when he worked for  RR /Bentley at Crewe in the 1940's. They had rusted a little over the decades so about 20 years ago I threw them away - would have been an ideal tool. Last used by me to free off a set of camshaft bearings in an A series engine circa 1967.

Oh the things I gave away or threw away over the decades that I could use now - of course that was safe in the knowledge that I would never need them again - how wrong I was - I understand Hoarders now. lol

Navigation

[0] Message Index

[*] Previous page