SOHC.co.uk Forums > CB750

Spoke advices please.

<< < (3/3)

Bryanj:
The one spoke is easy to fix, the other side you have to bend to get in

Lobo:
Cheers Bryan. It’s the longer ‘B’ spoke, inserted from inside the hub, with >90 deg bend as it heads back towards the rim / nipple. I’m not anticipating any problem, though it’s on the LHS of the hub meaning the whole wheel has to come out as the sprocket assy fouls a simple threading.

I think my previous failure was a B spoke too... this was fixed in 10 minutes. Due the more extreme head-bend of the Bs versus the As I guess it’s the Bs that tend to fail first?

Bryanj:
The difference is one feeds from inside to outside leaving the "head" inside the flange and is a doddle to swap, the othe goes from outside to inside and you can see thehead and is a swine to fit as you have to bend it round the spokes that are left

Navigation

[0] Message Index

[*] Previous page