SOHC.co.uk Forums > CB350/400
Side stand
AndyD:
Thanks
Deano - looks like the double spigot is standard then. From your photo the weld for the stand bracket looks to be more on the underside of the frame tube than on my one so maybe that is where a repair has been done.
Tayside - yes, nut left off as I've been playing with the stand. Haven't got a second bike to compare to sadly.
Might have to bite the bullet and take some of the paint off to see if the area's been welded up and then decide.
Cheers,
Andy
taysidedragon:
Andy, anybody else on the forum live near you who could bring their bike round? I would, but NE Scotland is a bit far!
AndyD:
Thanks Gareth
Agree it would be a bit of a trek - but down hill all the way here at least!
Had a friend at school who couldn't be convinced that north-south was different to up-down and firmly believed it would use far less petrol going south rather than north - bless!
Cheers,
Andy
taysidedragon:
--- Quote from: AndyD on June 14, 2021, 04:57:22 PM ---Thanks Gareth
Agree it would be a bit of a trek - but down hill all the way here at least!
Had a friend at school who couldn't be convinced that north-south was different to up-down and firmly believed it would use far less petrol going south rather than north - bless!
Cheers,
Andy
--- End quote ---
Brilliant! He's probably a politician now.🤪
taysidedragon:
Just a thought, are the wheels and tyres standard sizes?
Front fork springs correct length and stanchions positioned correctly in the yokes?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version