Other Stuff > Tricks & Tips

Pulling the CB360 generator rotor

(1/1)

nairb:
I needed to pull that rotor off my cb360.  I wanted to check the starting clutch since its making a racket.

I dont have a rotor puller.  The suzuki GT550 rotor is dead easy.  A bolt or 2 and it can prized off.

It looked like I needed an M16 bolt to get the rotor off the cb360.   But wait a minute..... the rear axle bolt on the GT550 also is a M16.
I had a spare so did need to take the one off the gt550.  It fitted the cb360 rotor fine.  A couple of turns and off popped the cb360 rotor.

So if you own a Suzuki GT550 & a CB360 and you want to remove the rotor on the cb360..... use the gt550 rear axle.
Who would have thought.  Unlikely I know.

Navigation

[0] Message Index