SOHC.co.uk Forums > CB750

Bank Holiday Rattle Can

<< < (3/8) > >>

PHILIP2908:
Hello,
Really disappointed no-one has responded so PHIL WARD you are the man to supply the measurements !! I m ready to apply the stipes now the paint work is finished.
As a reminder the need is for:
A - distance from outside of tank filler neck down to top of stripe
B – distance from bottom of stripe to the top of tank lettering at ‘A’ (of HONDA)
C – distance from bottom of tank lettering at ‘A’ to tank bottom
D – distance from outside of tank filler neck to ‘Preserve nature’ decal
E – distance from tip at end of stripe to bottom of tank
F - distance from bottom of stripe to the top of tank lettering at ‘H’ (of HONDA)
G - distance from bottom of tank lettering at ‘H’ to tank bottom
I - distance from front leading edge to HONDA badge (previous owner filled in a dent there with a ton of filler so going to have to figure a way to attach badge)
Sorry it seems a lot and i thank you or anyone else in advance. At least it will serve as a reference for others in future.
Thanks,
Phil in Cheltenham [ Guests cannot view attachments ]

philward:
Hi Phil, I"m out this morning but will measure this afternoon

Sent from my moto g(7) power using Tapatalk

philward:
Here you go
A - distance from outside of tank filler neck down to top of stripe -107mm
B – distance from bottom of stripe to the top of tank lettering at ‘A’ (of HONDA) - 30mm
C – distance from bottom of tank lettering at ‘A’ to tank bottom - 95mm
D – distance from outside of tank filler neck to ‘Preserve nature’ decal - 32mm
E – distance from tip at end of stripe to bottom of tank - 85mm
F - distance from bottom of stripe to the top of tank lettering at ‘H’ (of HONDA) - 30mm
G - distance from bottom of tank lettering at ‘H’ to tank bottom -100mm
I - distance from front leading edge to HONDA badge (previous owner filled in a dent there with a ton of filler so going to have to figure a way to attach badge) - 120mm

Bear in mind that tank stripe may be from different sources (mine done 6 years ago and can't remember were I got mine from0 and please check following post for picture of my tank to make sure you are happy with the wy mine is positioned
Phil

philward:
Picture of tank that measurements are based on

Sent from my moto g(7) power using Tapatalk

PHILIP2908:
Phil,
I can't thank you enough. Thanks for taking the time & trouble.
I will attempt to get the stipes on tomorrow and will post the results.
Thanks again.
Phil in Cheltenham

Navigation

[0] Message Index

[#] Next page

[*] Previous page