SOHC.co.uk Forums > CB350/400

What is this part please ?

(1/2) > >>

McCabe-Thiele (Ted):
Can't remember what this is it looks like some sort of stop - it has an O ring it looks like it's made from alloy ?

Do I need to fit it inside before I fasten up the crankcase?


what is this part by Macabe Thiele, on Flickr

Laverda Dave:
It's the oil gallery end plug Ted. It fits in the alternator end with the 'pip' being held in place by the alternator casting. Make sure you renew the O-ring👍.

McCabe-Thiele (Ted):

--- Quote from: Laverda Dave on June 01, 2021, 06:04:01 PM ---It's the oil gallery end plug Ted. It fits in the alternator end with the 'pip' being held in place by the alternator casting. Make sure you renew the O-ring👍.

--- End quote ---

Thanks I'm guessing 'O' ring isn't included with a normal gasket set.

I did get a set of O rings from NJ for the screw in end caps so there might be one in that set I will take a look  - thanks Dave.

philward:
Try Julie for the o'ring - I got one for the 500 build from Julie

Bryanj:
And dont try starting the engine without the generatorcasing on or you will e trying to find that plug along with using bags of kitty litter

Navigation

[0] Message Index

[#] Next page