SOHC.co.uk Forums > CB350/400

Rear swing arm bush

(1/2) > >>

JParty:
Hello!

I’m having great difficult removing the bushes housed in the rear swingarm that isolate the lower shock mount. I’ve tried pressing inside a vice and these bushes are properly stuck. Does anyone have experience getting these out? I don’t have a torch but I guess heat is the next and last option.

Thanks!

K2-K6:
Socket big enough for bush to pass into one side, socket sized to the outer bush the other side,  bolt right through (put copper-slip on threads) then it shoul be able to wind it through by tightening each end against themselves.

Oh, you'll need a washer each end to stop the bolts going through the sockets.

philward:
As you have said, the vice with appropriate sized sockets have worked for me in the past - they do take some pressure though (my vice is a pretty hefty 5 inch Record vice)

Johnny4428:
I pressed out the centre rubber then got hacksaw blade to cut through outer metal ring then collapse, very easy after struggling to take them out in one.

JParty:
Thank you for the suggestions. They weren't budging with the sockets and press so had to get a lend of a junior hacksaw as per oddjob's suggestion and that worked a treat. Thank you again!

Navigation

[0] Message Index

[#] Next page