SOHC.co.uk Forums > CB350/400

Master cylinder bleeding

<< < (3/3)

philward:
I had similar issues years ago on my 750k2 and as K2-K6 says, it was the smaller hole blocked - it appeared clear when poking a pin down but drilled the hole with a 1mm drill and it blead instantly

JParty:
Thanks for your help and time. Really appreciate the replies. I’ve ordered a DSS master cyl as need to get the bike on the road before the weather turns. Come winter I’ll get a rebuild kit so I can get the original back on.

Navigation

[0] Message Index

[*] Previous page