SOHC.co.uk Forums > CB500/550

i usually use STP

(1/2) > >>

captaindonutbikes:
but anyone got any other recommendations/old wives tales/urban legends for assembly oil?

cheers

totty:
I've never used it but several people have recommended a Molyslip assembly oil. I've used their engine and gearbox additives, chain oil and air drying film (ADF - dry anti seize compound).

SteveD CB500K0:
I always use prodigious quantities of clean engine oil when assembling.

mick:
I use the same oil i'm going to run the bike on when rebuilding the motor ;), cheers Mick.

Bryanj:
If its going to be run soon after buiding loads oil from the can you will fill it with, if it's gonna stand for a while assembly lube---I use copaslip, turns the oil an odd colour but never had a problem

Navigation

[0] Message Index

[#] Next page