SOHC.co.uk Forums > CB500/550

Carburretor rebuild

(1/1)

florence:
On my 500, I noticed one of the float bowls is weeping a little and realise I might have to replace the seal.  I thought, while they were off it might be a good idea to do the seals on the jets at the same time.  The last time I overhauled the carbs fully was 26 years ago and possibly, back then, I used the original ones anyway.

Before starting this mini project I've been looking online but it seems hard to find kits that have just the O rings, I don't want jets or float valves or anything.  Has anyone found such kits anywhere?

The other thing I might need is a supply of float bowl screws as the original ones are a bit chewed.

Trigger:
Nurse Julie does all the 0'ring upgraded carb kits and JIS screws  ;)

Nurse Julie:
Not sure where you are looking but I sell them on ebay. PM me and I will give you a little discount

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]

florence:
That's amazing, thank you.

Navigation

[0] Message Index