SOHC.co.uk Forums > CB750

brake lines .... are braided steel worth it here?

<< < (4/5) > >>

Skoti:
Here's the Goodrich fitting that goes in the mudguard wire loop and grommet.

This is similar to what I used to keep the original caliper hard line.

https://www.goodridge.co.uk/collections/jic-unf-re-usable-fittings-for-600-series-hose/products/jic-zinc-plated-steel-metric-fixed-female-with-two-circlip-grooves-convex-seat   

Sesman:
Hi, Skoti.

Thanks for that, but I’m talking about the mudguard wire loop that holds the rubber grommet on the original hard lines.

Skoti:
Sorry,

my heads a bit fuzzled, too much bier last night...

I would probably chop a wire loop from an old mudguard and attached a small bracket to it, then drill and fit to the mudguard brace with a couple of nice 4mm original Honda JIS set screws.

It'll be interesting to read what others do tho.

Good luck

Skoti

Sesman:
Unfortunately using the original won’t work as it’s ‘handed’. But yes, interesting to learn what other do.

4wDaz:

--- Quote from: SumpMagnet on August 27, 2021, 11:24:48 PM ---Looks like a full set of hoses for my F2, front and rear come to £132 with VAT.

Thats in plain black with plain stainless fixings

Hel and Goodridge are pretty much the same pricewise, to within a couple of £££.

--- End quote ---
Seems expensive, are they standard length and fittings ?

Navigation

[0] Message Index

[#] Next page

[*] Previous page