SOHC.co.uk Forums > CB750
Progress on the 750
Johnny4428:
Help! Guys I was very concerned about this. Ran bike up yesterday to run through the gears and could only select first gear with difficulty getting Bach in neutral. Couldn’t get any other gears. Took gear selector cover off this afternoon and all gears no problem. Downgraded from major incident to major irritation. Here’s photos see if anybody can see anything wrong before I put cover back on.
haynes66:
having looked through my pics, the only thing that looks different to mine is the spring that sits on the lever that rolls on the selector drum. your spring doesnt look like its sitting on the notch on the top surface. dont know if that makes sense
philward:
Johnny, I'd check the order of the parts on the shaft of the arm that rolls on the drum using the parts book schematics - I seem to remember having similar problems on one of the 750's I have built
https://images.cmsnl.com/img/partslists/honda-cb750k2-four-england-gear-shift-drum-stopper_bigma000039e13_f4f1.gif
Johnny4428:
Thanks guys! I see what you mean spring could be wrong way round? Yes I will check order of selector parts.
Annoyed now with myself for not paying more attention when I put it back together.
Johnny4428:
Had a go at the gears this morning and sorted the spring that appeared to be wrong way round but didn’t make any difference. It appears that the neutral rotating wheel is fouling on the inside of casing??? That’s easy sorted but it goes against the grain to get into it with the dremel. These are all original parts that were on the bike before. If you zoom in about photo centre you will see small nick.
Ahh different crankcases though!! (Should be the same)
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version