SOHC.co.uk Forums > CB350/400

How is the front three way connector fitted to the frame.

<< < (2/3) > >>

McCabe-Thiele (Ted):

--- Quote from: Bryanj on August 24, 2021, 10:55:09 PM ---No rubber bit just bolts tight to bottom yoke

--- End quote ---
Looking at the picture then the headlamp / indicator frame bolts on top of the small bracket attached to the 3-way connector - the steel insert in the rubber mount will hold it firm to the frame.

Deano400:
Yes that's correct.

McCabe-Thiele (Ted):

--- Quote from: Deano400 on August 30, 2021, 10:43:38 AM ---Yes that's correct.

--- End quote ---

Looking at the frame wiring diagram there is a wiring harness Clip at the front of the frame its item 74 in the parts list 32123-375-000 DS no longer available is this held on with the same bolt??

Deano400:
No. The clip you are talking about mounts on the under side of the steering stem between the stem and the right fork leg. If you look on the underside of the steering stem you will see the mounting hole.

McCabe-Thiele (Ted):

--- Quote from: Deano400 on August 30, 2021, 02:48:10 PM ---No. The clip you are talking about mounts on the under side of the steering stem between the stem and the right fork leg. If you look on the underside of the steering stem you will see the mounting hole.

--- End quote ---

Thanks I hadn't noticed that !

Navigation

[0] Message Index

[#] Next page

[*] Previous page