SOHC.co.uk Forums > CB350/400

Dent or deisgn rear plastic mudguard

<< < (2/2)

billdn:
I find several coats of silicone spray can do a reasonable job , but let it dry thoroughly !

Athame57:
I'm beginning to think this is a common problem but how does it happen?

McCabe-Thiele (Ted):

--- Quote from: Athame57 on August 26, 2021, 09:05:07 PM ---I'm beginning to think this is a common problem but how does it happen?

--- End quote ---

The dent I now realise is part of the design the scratch finish on the black plastic is age & use / abuse!

Laverda Dave:
It should slide in really easily Ted using the flat tangs on the frame that slide into the cut outs on either side of the plastic guard. Don't try to bend it, just slide it in from the back pushing toward the front and you will see the frame tangs engage into the guard. Fit the guard before you fit the rear wheel to enable you to get your hand in to guide it.

Navigation

[0] Message Index

[*] Previous page