SOHC.co.uk Forums > CB350/400

Can anyone identify these items please?

(1/2) > >>

McCabe-Thiele (Ted):
The big bracket came with my bike in a box of oddments it's not my rear exhuast bracket (I have that) could it have been part of the original system  any ideas please?

The two long bolts might have come from the front end somewhere as they were in a box with my Instrument bracket - obviously not original with the allen key head - they have a ferrule with some broken rubber bits ?

The two in the right of the photo have an odd hole in the ends?

I know I should have taken more photos as I stripped the bike down - at the time I told myself it's obvious - I clearly have not taken into account my Goldfish memory - yes the Castle in the bowl is a surprise every time!




..where do these fit by Macabe Thiele, on Flickr

Nurse Julie:
Exhaust silencer hanger bracket and the 2 bolts at the end are headlamp reflector fitting bolts, no idea about the middle ones.351 on the fiché for the reflector bolts.
[ Guests cannot view attachments ]

Athame57:
Interesting thing about the diagram Julie is that there are two cables going into the indicators yet I only have one....

TrickyMicky:
Diagram is possibly of a USA model. I believe they had a 21/5W bulb in the indicator, the 5W part being used as daytime running lamps. It also shows a headlight plug connector which is used for a sealed beam unit.

McCabe-Thiele (Ted):
Thanks for the two identified parts - my Motad System did not use that bracket - still haven't found where the centre two bolts came from - time will reveal!

Navigation

[0] Message Index

[#] Next page