SOHC.co.uk Forums > Project Board
75 400 Project commences
McCabe-Thiele (Ted):
Are you going to remove the centre stand pivot ?
PaulC:
It's on the list Ted
PaulC:
Does anyone have a close-up of an original 400/4 kickstarter, as I have a couple of different one's; but only one has decent internal splines.
[ Guests cannot view attachments ]
[ Guests cannot view attachments ]
These are the ones I have!
Regards Paul
taysidedragon:
They are not 400f kickstart levers.
This is mine, with a crack in the usual place. A black plastic cap covers the hole in the knuckle.
The allen screw is not original. HTH.
PaulC:
--- Quote from: taysidedragon on October 06, 2021, 12:37:10 PM ---They are not 400f kickstart levers.
This is mine, with a crack in the usual place. A black plastic cap covers the hole in the knuckle.
The allen screw is not original. HTH.
--- End quote ---
Taysidedragon, thanks for the photos that's a great help. The bottom one is from a CB250, the top one is unknown but more of a match to yours. Maybe I can make one good one out of the pair, as long as its functional 😀.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version