SOHC.co.uk Forums > CB750

Newbie Here

<< < (3/6) > >>

cbxman:

--- Quote from: Macabethiele (Ted) on October 08, 2021, 12:51:26 PM ---Welcome Jerry to the forum there is a raft of expertise here.

I watched the auction on TV of the "Broughs of Bodmin Moor" held at Stafford Bike Show in 2016 by Sotherby's - over £300k for a double rear wheeled pile of rust Brough - an Austin 7 engined example I think it was.

New meaning to "hard to find" parts.

--- End quote ---

I know a bit of patina is regarded as preferable to stock shine these days, but that is crazy!

Cheers,

Jerry

cbxman:

--- Quote from: SteveD CB500K0 on October 08, 2021, 01:09:12 PM ---Sorry Jerry but that’s just not good enough

You can’t write about CBX and 500/4 restorations without providing pictures!

You need 5 posts to add pictures so just post a few replies on here.

Steve


Sent from my iPhone using Tapatalk

--- End quote ---

Steve,

OK.  Fifth post I think.  I'll put some photos on here shortly.

Cheers,
Jerry

cbxman:
As requested by Steve,

Here are a few photos of my CB500-4 and CBX.

CB500-4 purchased from eBay in 2009. It was sold as a pair with a really scabby 550-4 '78, which I thought might it yield some spare parts.  I don't have many photos of it in poor condition, but one is attached.  The bike was a smooth, but a little lack lustre performance wise, and sold it on to another VJMC member.

I used very little of the 550-4 so I disposed of the large parts and kept some of the smaller ones.  I guess these are available to someone who is interested.  I would have to have a rummage in the loft though. I know I have a tank and crankshaft (same as 500-4 I believe).  Just ask.

The CBX I bought from a dealership in Colchester in 2001.  It was rough, but most it was there.  I spent a few grand with David Silver, eBay globally and many happy hours putting it all back together.  The engine and running gear was really worn out, so service hone rings crank and big end shell etc......yada...

I hope that relieves Steve's anxiety  :)

Cheers,
Jerry

SteveD CB500K0:
Luverly.


Sent from my iPhone using Tapatalk

JamesH:
Welcome to the forum and best of luck in your search for a 750 to restore. From the pictures of your 500/CBx it certainly seems like you know what you’re doing.

My best advice (having restored a couple of 750’s to concours condition) is find the most complete bike you can and find one where replica 4-4 exhausts are available.

I believe DSS still has the replica HM341’s in stock (for K2-6 bikes. Genuine NOS Honda are £2000+ for a set now, if you can find them. The HM300 replicas (Yamiya) for Sandcast, k0-K1 are now £1850/set (NOS Honda £3000) and are out of stock and sporadically available.

My advice would be start looking for. k2 onwards bike to restore.

Navigation

[0] Message Index

[#] Next page

[*] Previous page