SOHC.co.uk Forums > CB500/550

disk drilling

(1/4) > >>

captaindonutbikes:
I have the auto cad file for a 750 disk rotor and wanted it machining out.

firstly they are the same as the 550 ? and

any one know of a good place to try in the London area ?

cheers
 ;)

Bryanj:
750 bigger than 500

Seamus:
Would it be possible to scale the drawing down to the correct size?

florence:
Are you talking about your brake disk and having it drilled?  

Does it make much difference?  I have a drilled one under my workbench but have never bothered to fit it.

Would you be able to take a pattern from it?

florence:
Looking at mine very carefully I would say that it has been drilled by hand because one of the holes is v.slightly off centre.  I would imagine that with careful use of a professional bench drill it should be possible to do it oneself.  What do people think?

Also has anyone used a drilled disk and are they worth the trouble?

Navigation

[0] Message Index

[#] Next page