SOHC.co.uk Forums > CB500/550

Clutch mechanism

(1/1)

Popstar:
I've discovered why the clutch isn't working on my project bike 1 the cable looks like it's been under artillery fire, 2 a small collar is missing where(see photo) the ball bearing sit's. I will have to see if Silvers have a pair. There is a rim on the outer edge which would be difficult to match.

Bryanj:
The ball bearing goes in the hole, there is no collar

Popstar:
You are probably right but the collar dropped out when I started degreasing the mechanism.

Popstar:
Ok I will attempt to turn the large external adjuster screw later in appears to be seized up. Incidentally what diameter should the ball bearing be?

Navigation

[0] Message Index