SOHC.co.uk Forums > Project Board
The rebirth of Lazarus
mickwinf:
that would be great Bryan, let me know when you dig it out.
mickwinf:
I started to de rust the swing arm, and found a hole underneath near the torque arm mount, i think it can be welded and will be out of sight so ok so far but tips on getting the bushes out would be welcome.
Bryanj:
Pivot bushes or shock bushes.
Pivot bushes fit hacksaw blade through the hole and cut till bush collapses, i have ocassionally had to cut 2 opposite sides of bush
mickwinf:
Yes its the pivot bushes, the shocker ones came out using two sockets and the vice.
mickwinf:
Poor Poor Lazarus, he has been horribly mistreated in the past and more things come to light as i strip him down further. As expected the pistons were seized up but also the alternator part that screws to the interior of the outer casing was not attached at all so further jamming everything together. i now have all the crankcase bolts out but does not want to come loose, i have remembered the hidden bolt inside the sump area but no dice. advice welcomed please.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version