SOHC.co.uk Forums > Project Board
The rebirth of Lazarus
Sesman:
Coming together now, Mick. Definitely worth the effort. It must be very satisfying considering what you were presented with.
mickwinf:
I think they did 2 coats with rubbing down but not had any problems yet. Stainless bolts are from middletons as they do the range of sizes with correct threads and heads.
Bryanj:
Looks a fraction better than when you got it
K2-K6:
I like the really shiny black on frame finish, maybe some don't feel it's original enough but something as this one, brought back from near death, is lucky to be getting such care and attention. :)
Nice work all round.
Oddjob:
I recognise the bolt heads on the Middleton bolts, he does 10 metric fine bolts with the correct 14mm heads as well. Oddly enough I found my stash today hiding in a box. I got the 4 for the engine hangers, 4 for the twin calipers and the 2 for the rear suspension lower bolts. The problem being I'm fitting Mazzocchi dampers and they don't fit as they are metric coarse. Might be able to reuse some of the old Middleton bolts from the early 80s that I was forced to fit in the engine as they didn't do 14mm headed bolts back then.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version