SOHC.co.uk Forums > CB350/400
Honda CB400four crankcase roller bearing wear
eem46:
Thnx All, will dry build this weekend to see if they clamp.
K2-K6:
Take particular care to remove the sealant that appears to be around the bolt holes in some of the pictures as that will change the dimensions if left there when you assemble it.
Bryanj:
Castle? what castle
McCabe-Thiele (Ted):
Just thinking outside the box for a moment are the same corresponding marks on the upper casing as well?
Not sure from your comments if you definitely have a matched pair of casings when you bought them.
Bryanj:
There are only 1 set of markings for mains size
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version