SOHC.co.uk Forums > CB500/550
550 F2 started!
Laverdaroo:
Yeah, still decorating
Sent from my iPhone using Tapatalk
Sesman:
:)Glad,to be of service…crack on.
Laverdaroo:
On like yer don’t know. It’s going to be blasted tmrw
Sent from my iPhone using Tapatalk
Laverdaroo:
Been slowly fettling the carbs over crimbo and have nanny’d them into something half decent now I think.
Got a box of polishing ingredients in today from Scotland as per Oddjob’s recommended recipe on ‘the preferred polishing method’ so I’m going to have another go at the caps and bowls but really want to see if I can get the balance bar a bit better.
The frame landed finally and already been sent to Yeovil to be blasted and etch primed.
Over the break I also fired the new Steel Dragon air box to Chewy which looks great and started buttoning up the cable routing and holding blocks for all the carb over flows and breathers etc. I’ve settled on a small block of black nylon which I bought from an engineers in town for 3 quid or something like that. I’m going to make a 15mm x 20mm x 100mm block up and drill it to take all the pipe work. This will then be fixed to the lower crossmember of the frame below the swinger, all tidy and out of the way and not a cable tie in sight……..brilliant.
Will report back on progress as and when
attempted
Sent from my iPhone using Tapatalk
Laverdaroo:
Sent from my iPhone using Tapatalk
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version