SOHC.co.uk Forums > CB500/550
550 F2 started!
Oddjob:
Finished it Roo. Bolts came today.
It's not to my satisfaction if I'm honest. I intend to replace the front board and modify the new one so it gives me more working area. It will do for the time being though. Not varnished it yet, might as well wait until I do the new board. I also need to do the bolts on the rear board.
Johnny4428:
That’s quite something Ken. I have one the same and they are very handy. Got mine from an elderly neighbour who’s husband passed away in the mid eighties. It has been used a lot.
Laverdaroo:
"It's not to my satisfaction if I'm honest. I intend to replace the front board and modify the new one so it gives me more working area. It will do for the time being though. Not varnished it yet, might as well wait until I do the new board. I also need to do the bolts on the rear board"
You miserable git ;D ;D
That looks the absolute swingers Ken,give over!
Now stop arsing about and crack on with those weeds in that path! ;) 8)
Top draw as ever mate, better than when new. 'Work Mate Monthly' are gonna flip when they see that! ;) :D
Laverdaroo:
Sooooooo, started to get some bits in the cases and realised I'd not changed one of the bearings in the gearbox. Managed to keep everything in order and give it the once over but my question is..........Although the offending bearing has a circlip and supposedly an 'o'ring, (which was long gone and needs replacing) straight after it. Is it a bearing that needs to be pressed off or should it yeald with some gentle thuds held through a vice with a block of wood n a mallet? I think i know the answer but some help required please if poss peeps.
Thankyou please :)
Laverdaroo:
Sent from my iPhone using Tapatalk
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version