SOHC.co.uk Forums > CB500/550
550 F2 started!
Bryanj:
I got some narrow stainless jubilee clips and by the way you have to buy the screw seperate from Honda.
When looking for clips i think you need 7mm wide which can be awkward
Oddjob:
Just to clarify Roo. But the airbox to carb are a different size to the carbs to engine, there are 8 of the later and 4 of the former.
I got quite a few in the boxes when I bought my 2 spare 550 engines recently, not sure what condition they are in and I'm ashamed to say I still haven't got round to setting up my zinc/nickel plating stuff.
How many would you need of each?
I used these when I first rebuild the L reg 500. https://www.stainlessmiddleton.co.uk/34317-extra-narrow-clip-5-16-wide-hose-clamps
They sat in the garage for over 40 years and they still look perfect. They are thin enough not to foul the rubber edges of the manifold rubbers. And they look very smart fitted.
Bryanj:
Have a look at ebay item 402702096350 i used them then cut the extra band off with a dremel, seemed to work ok, narrow enough to fit groove in rubber and shiney enough to please magpies
Sesman:
Try 4into1.com
Laverdaroo:
Morning all,
I have the steel fragon air box to fit so I need the bands that attach from the carb to the air box, the bands that go from carb to rubbers and from the rubbers to the head.
Sorr Ken, I was looking late at night and didnt really explain that well.
Basically I have no clamps/bands of any description as they were all scrap or of dubious origin, condition.
Basically its all 12 that I need ::)
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version