SOHC.co.uk Forums > CB350/400
What is correct cable route on 400/4 clutch cable ?
McCabe-Thiele (Ted):
Does the wire type clip near the offside tank rubber mounting hold just the throttle cables or is it okay to run the clutch cable through it?
My clutch cable route is down from the front lever through the gap between the front forks & speedo mount bracket - it passes past the front of the ignition switch and curves nicely via the clip to the clutch casing adjuster. I have a nice free operation but some pics seem to show the cable not running between frame & fuel tank.
Deano400:
The way you've done it sounds right Ted.
[ Guests cannot view attachments ]
[ Guests cannot view attachments ]
McCabe-Thiele (Ted):
--- Quote from: Deano400 on November 15, 2021, 05:59:34 PM ---The way you've done it sounds right Ted.
(Attachment Link)
(Attachment Link)
--- End quote ---
Thanks for that - those schematic sketches are very useful. Ted
Sesman:
Hey Ted.
I can’t comment on the cable route, but the bike is looking really smart. Buy yourself a decent heater and keep the pressure up. But I thought you had a blue frame?
Sesman:
Apologies, it was Deans :-[
Navigation
[0] Message Index
[#] Next page
Go to full version