SOHC.co.uk Forums > CB750

What would you do…..?

<< < (4/4)

andy120t:
Head Up Display clocks in the seventies too?...

SeanFD:

--- Quote from: sprinta on November 29, 2021, 09:27:47 PM ---
Think that you will find that because the UK continued with the K2 model until the K6 arrived, that from around 72 to 75/6 all UK bikes would have had frame numbers in the 20******** range and as such the engine No's would have been in the 20********* for 72 but in 73 the engine No's would have changed to 22****** series in 74 23******* etc.

So you need to check what year the bike was first registered as you may well find that it has the correct engine and frame No's for a UK bike of that year.

--- End quote ---

I'm picking up on this just now, after a long absence, because I have the same thing: Frame - 208**** and engine - 231****

When I started my rebuild I used a K2 parts book, out of ignorance, but later realised I should have been using a K4 engine parts book, or should I?

Or should I use a K4 parts book for both frame and engine?

Cheers

Bryanj:
UK K2 parts book taking note of changes by engine No

SeanFD:
Thanks Brian

I'm happy now as that's, in fact, what I did.  :)

Sean

Navigation

[0] Message Index

[*] Previous page