SOHC.co.uk Forums > CB500/550

swinging arm

(1/2) > >>

shurety2:
hi out there,i was wondering if there is an alternative to the standard CB550f swinging arm or is it best to stick with the standard one.

K2-K6:
Natural  choice as alternative is Dresda, but really hard to scource nowadays.

Thread on here that discussed Dresda and another fitment http://www.sohc.co.uk/index.php?topic=18149.0 that may be of interest.

Bryanj:
Unless you are racingthe standard one is plenty strong enough, as long as not rusted through that is

shurety2:
many thanks for the replies

Kelly E:
I installed a needle bearing kit in my 74' CB550K swingarm and the motion is silky smooth. Along with a set of Hagon shocks it works great.

Navigation

[0] Message Index

[#] Next page