General > Out & About
Out and about 2022
mike the bike:
Went on a great rideout with the bike club. 14 of us in total and did 131 miles. I needed that.
smoothoperator:
Good to be out on the newly restored bike, 60 miles on the clock now, not venturing too far away just yet though. I have kept the revs below 5000 so far, 4000 up to 30 miles, the shells are original so really the only frictional things to bed in are the rebored pistons. Any tips on a running in regime would be welcomed. The only issue at the moment is a reluctance for the revs to fall back to a decent idle when warm. I need to check the cable routing before I dig deeper. I installed taper roller bearings in the steering yesterday which has greatly improved the feel of the front end, also the handlebars now line up with the direction the bike is travelling, which is a bonus. Never having ridden one of these before, the cornering is amazing, makes my Bonneville feel like a big fat pig.
Nurse Julie:
The bike looks fantastic Steve.
Johnwebley:
--- Quote from: smoothoperator on April 17, 2022, 06:48:45 PM ---Good to be out on the newly restored bike, 60 miles on the clock now, not venturing too far away just yet though. I have kept the revs below 5000 so far, 4000 up to 30 miles, the shells are original so really the only frictional things to bed in are the rebored pistons. Any tips on a running in regime would be welcomed. The only issue at the moment is a reluctance for the revs to fall back to a decent idle when warm. I need to check the cable routing before I dig deeper. I installed taper roller bearings in the steering yesterday which has greatly improved the feel of the front end, also the handlebars now line up with the direction the bike is travelling, which is a bonus. Never having ridden one of these before, the cornering is amazing, makes my Bonneville feel like a big fat pig.
--- End quote ---
Looks good,
Don't load the engine,
Let it spin freely.
Accelerate fairly briskly,
And at times close the throttle and let the motor slow the bike.
The idea is to get pressure behind the rings, help them bed in and seal,
Sent from my SM-A750FN using Tapatalk
Johnwebley:
Out at Biker night
North bank of the Severn estuary,
Sent from my SM-A750FN using Tapatalk
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version