SOHC.co.uk Forums > CB350/400

Motad exhuast mounting brackets on a 400/4

<< < (2/8) > >>

Bryanj:
Ted, my wife who has me has had that cough since early november

Sesman:
Good move on the PCR, Ted. I had exactly the same symptoms. Interestingly I tested negative on three consecutive LF tests over a 48 hour period. I tested ‘positive’ on the PCR.

Deano400:
Ted, my son had symptoms and did LFTs 3 days running which were negative. Had a PCR on the day of his 3rd negative LFT and the PCR came back positive.

McCabe-Thiele (Ted):
First photo is the bracket I took off single bolt hole was on the rearmost frame hanger lug.


IMG_20220102_141100 by Macabe Thiele, on Flickr

This is the plate from my bit box I have undone the captive bolts that have steel spacers for the short plate - the captive bolts are spaced as per the rear two frame hanger holes on both sets of holes - there are two holes not shown on the bottom where it has a 90 deg bend to attach to the silencer.

IMG_20220102_141117 by Macabe Thiele, on Flickr

Laverdaroo:
Just got home, I'll have a look in a bit. Sorry youre feeling a but crap buddy. Good move on the PCR's though.

Navigation

[0] Message Index

[#] Next page

[*] Previous page