SOHC.co.uk Forums > CB350/400

Front Axle socket 22 mm nut

(1/4) > >>

McCabe-Thiele (Ted):
I wanted to torque up the front axle nut - my Kamasa long reach thin walled socket set has various sizes including 21mm & 23 mm but no 22mm.
I've managed to do it using the 23mm socket but its not ideal.

Can anyone advise me as to a suitable brand of 22 mm socket that is deep enough as I do not want to buy another complete set?

Laverdaroo:
Anything from Halfords is pretty good Ted. They sell separate sockets so I'd try there first bud.

Johnwebley:
You need to consider the drive size,

Is it 3/8,or 1/2 inch

As it's likely to low but regular usage,

Go for what you want,

Snap on are good, but quite expensive

Sent from my SM-A750FN using Tapatalk

Bryanj:
Also B&Q do single sockets, i needed a hub nut one for a one time job £16 anywhere else £3 there

Moorey:
 A little surprising there isn't one as 22mm is industry standard for a 14mm bolt.

Navigation

[0] Message Index

[#] Next page