SOHC.co.uk Forums > CB350/400
Rear exhuast mounting bolt size question?
McCabe-Thiele (Ted):
The bolts I have are a bit of a loose fit in the mounting boss on the rear frame plus I can't find any part number in the manual that often quotes the diameter & length.
The way the lugs are made makes me ask if they are ordinary bolts or is there some sort of rubber mounting washers used in the fitting.
Can someone tell me what size the bolts should be please?
.
rear hanger by Macabe Thiele, on Flickr
taysidedragon:
From memory I think they are M8, about 50mm long. I'll try and get out to the garage and measure mine later.
Walking the dog at the moment! 🐾
McCabe-Thiele (Ted):
--- Quote from: taysidedragon on January 12, 2022, 07:12:23 PM ---From memory I think they are M8, about 50mm long. I'll try and get out to the garage and measure mine later.
Walking the dog at the moment! 🐾
--- End quote ---
My calipers tell me the hole in the frame is 8.5mm does that tie in with the diameter of a m8 bolt fitting?
taysidedragon:
--- Quote from: McCabe-Thiele (Ted) on January 12, 2022, 09:48:08 PM ---
--- Quote from: taysidedragon on January 12, 2022, 07:12:23 PM ---From memory I think they are M8, about 50mm long. I'll try and get out to the garage and measure mine later.
Walking the dog at the moment! 🐾
--- End quote ---
My calipers tell me the hole in the frame is 8.5mm does that tie in with the diameter of a m8 bolt fitting?
--- End quote ---
Yep. Clearance hole for M8 bolt. Gives you a bit of wiggle room to get the bracket lined up. 👍
Deano400:
From the parts manual I have the bolts are given as 92000-08045 Bolt, Hex., 8x45.
The copy I have isn't the clearest but I think the bolts are part 619.
[ Guests cannot view attachments ]
[ Guests cannot view attachments ]
Navigation
[0] Message Index
[#] Next page
Go to full version