SOHC.co.uk Forums > CB350/400

Ignition barrel

<< < (2/3) > >>

Oddjob:
Phil, fit the yoke pinch bolts the other way round. If the nut ever shakes loose it stops the whole bolt falling out. That way looks easier to work on but TBH if your ever undoing that bolt your removing everything anyway.

Nurse Julie:
You must be correct Bryan. Its a pretty poor design really, you would have thought Honda would have designed something without a gap but, obviously not 😂😂😂

Oddjob:
Most likely a poor fit as the barrel mounts to the top yoke and the console attaches to the speedo bracket, would be better if they'd made the hoop smaller but then they should have made the screws mounts stronger as well, number of them I've seen bust open is beyond a joke. I found some stainless screws for mine so they don't rust the heads and round off when you go to replace a bulb.

Sesman:
Thanks, Ken. Actually I was already on to that as you had mentioned it on a different post last year. The current arrangement is temporary as I’ve got to drop the forks to fit the re chromed fork ears.

Just out of shot is a ‘post it’ note to remind me.

Thanks for the reminder, though👍

ttr400:
Sorry for the hijack,  but trying to reply to a message from ken  (Oddjob)  it won't send and says message blocked?

Ken let me know.

Kevin

Navigation

[0] Message Index

[#] Next page

[*] Previous page