SOHC.co.uk Forums > CB500/550

Cam shaft and rocker arm wear?

<< < (4/9) > >>

AshimotoK0:

--- Quote from: alexdecker on February 08, 2022, 07:04:58 AM ---
--- Quote from: Oddjob on February 06, 2022, 04:57:22 PM ---I saw a NOS camshaft the other day on EBay, expensive though.

--- End quote ---

I wrote with an eBay seller who is selling one that is new. He is telling me that the part number is 14101-323-000EH, but he is warning me that the cam shaft is only 27hp. I am not even sure what he means, as I have only been able to find one part number for the cam shaft in an CB550F (for all the CB550 actually), and his part number fits that.

Am I missing something here?

--- End quote ---

I know with the CX500 in Germany there were two different power options  (perhaps due to some legislation in Germany) so perhaps that was the case in Germany on the 550. Even the 1st CB750 diecasts had German option on the pipes and were marked HMCB750 rather than HM300. Having said that I can find no reference to a lower power cam option in Germany in either parts books I have only on CMSNL

Uli on here (Sgt.Pinback) will probably know. Although the 27PS option is listed for USA ? ?  :-\

murdock:
compre un arbol de levas usado que este dentro de esta tolerancia , por que gastar tanto dinero en uno nuevo ?
como ya le dije un tornero puede reparar el suyo , ojo ! aqui hay otra errata , en vez de 35.85 son 34.85 


buy a used camshaft that is within this tolerance, why spend so much money on a new one?
as I said a lathe operator can repair yours.  see here is another typo, instead of 35.85 it is 34.85.

alexdecker:

--- Quote from: murdock on February 08, 2022, 05:08:38 PM ---compre un arbol de levas usado que este dentro de esta tolerancia , por que gastar tanto dinero en uno nuevo ?
como ya le dije un tornero puede reparar el suyo , ojo ! aqui hay otra errata , en vez de 35.85 son 34.85 


buy a used camshaft that is within this tolerance, why spend so much money on a new one?
as I said a lathe operator can repair yours.  see here is another typo, instead of 35.85 it is 34.85.

--- End quote ---

I have no workshop in my area that provide that service, so that's why Im looking at new ones as well. I live in Denmark…

philward:
And part of the repair process will involve case hardening after filling/machining - so even more specialist/expensive

murdock:
a pity, but it would surely cost much less than 1100 euros + taxes.

Navigation

[0] Message Index

[#] Next page

[*] Previous page