SOHC.co.uk Forums > CB500/550

coils

(1/4) > >>

captaindonutbikes:
quicky to be sure.

thin fitting to live -  fatter fitting to negative

totty:
Are they from a Boyer kit ?
If they are then they should have + and - marked near the terminals.
Can you also post a pic of them mounted as I'm not really happy with how I've mounted mine.

Yoshi823:
If there's no +ve or -ve marking, it dosn't really matter, as the primary/input circuit isn't polarity conscious. One side will have the +12v standing voltage, the other will be the switched input from the contact breakers.

http://en.wikipedia.org/wiki/Autotransformer

So the spade connectors are the low tension input, the output to the spark plugs is for the fatter connector.

captaindonutbikes:
Tim, I was refering to the HT leads attaching to the coils.

fatter earthed cable end to negative output - thin live HT end fiitting to live output from the coils or does it not matter a toot ?

Bryanj:
As its a Wasted Spark system with both plugs sparking together it dont matter

Navigation

[0] Message Index

[#] Next page