SOHC.co.uk Forums > CB500/550

Parts list for vapor honing

<< < (3/3)

Laverda Dave:

--- Quote from: Sesman on March 12, 2022, 08:58:15 AM ---Then dry for a few days in the airing cupboard or for a couple of hours at 90degC in the oven and blow out all passages with a high pressure airline. Avoid the dishwasher as it will ruin the finish.

--- End quote ---

Very true👍. And we all know the dishwasher is only used to clean wiring looms to look like new (when the wife is out of course 😁). Thanks to Bryan for that gem of a tip.

Sesman:
Yep, did my loom in the DW and it came up like new.

Lobo:
I want to know more wrt dishwasher and the loom….

OBVIOUSLY the missus has to be out, but beyond this standard tablets, heavy duty cycle, evacuating water from the sheathings, concerns at the bullet connections?
So many questions - am I overthinking it all?

Laverda Dave:
I put my loom in at 50c and let the machine do the rest. The heat at the end of the wash cycle dried the loom and connectors off nicely. I did wrap cling film around the original makers label of the loom to protect it.
Once I took the loom out I used a dishwasher cleaner from Lidl to clean it on a short cycle and before the wife returned home. It was just a shame I had forgotten to take the repainted brake caliper out of the oven before she opened the door😬

Navigation

[0] Message Index

[*] Previous page