SOHC.co.uk Forums > CB350/400

Just checking I’m not going mad! 400/4 conrod shells.

<< < (2/4) > >>

Deano400:
Definitely been apart before Graham, enough Hylomar Blue inside for ten engines.

Oddjob:

--- Quote from: Trigger on March 11, 2022, 01:22:54 PM ---
--- Quote from: Deano400 on March 11, 2022, 11:54:32 AM ---Thanks Ken and Graham.
The more I look I'm pretty sure they are Black and not discoloured. The fact that the plastigage looks good I think what you are saying Graham is probably the case. Thanks again.

--- End quote ---

Without seeing it up close and personal, i would say it has been re-shelled before.

I have had so many members engines here over the years that they have rebuilt by the owner with advice on shell codes from other members on the forum that always point to the chart in the workshop manual and it has made a mess of there crank. If the plastigage is good, then that is the correct measurement  ;)

--- End quote ---

Name one.

Trigger:
That would be unprofessional in my business as, I have a very good customer relationship .

Oddjob:
There's a very old saying that goes

"Put up, or shut up"

Deano400:
I’ve now checked all the conrods with plastgage. The three Blacks were all good. The conrod marked 3 with the Green shells appears to be right on the limit.

[ Guests cannot view attachments ]

Am I right in thinking that going to Brown shells would be the right move? TIA.

Navigation

[0] Message Index

[#] Next page

[*] Previous page