SOHC.co.uk Forums > CB500/550
Fitting new Motad - need colletts/collars
toucheturtle:
I've order them from Dave Silvers, you'll need 8
florence:
I don't know if you are still looking but these will do the job.
http://cgi.ebay.co.uk/CB550-4-CB550-four-Exhaust-collets-x-8-/290434703171?cmd=ViewItem&pt=UK_Motorcycle_Parts&hash=item439f41df43#ht_500wt_953
fazer1k:
--- Quote from: florence on May 13, 2010, 08:56:15 AM ---I don't know if you are still looking but these will do the job.
http://cgi.ebay.co.uk/CB550-4-CB550-four-Exhaust-collets-x-8-/290434703171?cmd=ViewItem&pt=UK_Motorcycle_Parts&hash=item439f41df43#ht_500wt_953
--- End quote ---
Thanks anyway for the link. Have now received the new collars from David Silvers.
Fitting the new Motad is now proving a challenge....two of the downpipes would not fit into the can without a lot of persuasion, now the pipes (number 2 is worst) do not line up with the cylinders...will try again at the weekend, perhaps a call to Motad is needed.
florence:
no, it is a pain to line it all up, trial and error usually sorts it. Once it's together I found that if I ever need to take it off do so in one piece.
matthewmosse:
I agree they can be a royal pain to get fitted, but as has been said once fitted they can be removed and fitted as a unit. I found a hide mallett was very usefull, but a bit of wood and hammer might suffice to perswade things to fit.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version