SOHC.co.uk Forums > CB500/550
CB550k1 US Import - UK registration
Bryanj:
I think thats a later type tacho cable for a different bike but if it works its fine.
juitz:
Hey people,
Another sanity check!
The rear brake pedal lever- again don't have a good reference photo. Although I took heaps of pictures during the dismantling, lesson learnt that they weren't enough.
Is the rotating hub need to be flush against the frame? See pic attached. The pivot is really close to the swingarm, but eyeballing it looks like its aligned with the drum brake lever?
juitz:
--- Quote from: Bryanj on August 31, 2022, 11:47:54 PM ---I think thats a later type tacho cable for a different bike but if it works its fine.
--- End quote ---
Cheer Bryan. It works so will keep it.
Oddjob:
The rotating part has a cut out for the bolt for the brake lever to pass through, if it goes through then you're ok. You've not got the spring on yet which accounts for the odd look of it being too far out from the frame.
Don't forget to REALLY grease that pivot tube.
Make sure the alignment punch marks line up on both the pin and the lever.
juitz:
Thanks Oddjob - rear brake lever is now sorted! 👍
Does anyone know of a type of connector I can use for the front brake switch? Can't seem to find the right type?
[ Guests cannot view attachments ]
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version