SOHC.co.uk Forums > Project Board
Another UK CB500 K0
Nurse Julie:
And the fiché shows it the way I have it fitted.
[ Guests cannot view attachments ]
Oddjob:
If you study the pic Julie you can see the hole at the bottom, it's hard to make out but it is there.
Just checked mine and it's exactly the same as the pic, 2 small crimped areas for the locating lugs on the horn and the hole at the bottom about 1.5 inches away from the left hand crimp. When fitted to the horn it locates with the hole at the bottom and the horn wires coming out about 10 past.
Oddjob:
Looking at your pic of the horn in close up shows your cover is crimped on both sides of the hole, mine isn't.
IIRC the horn is a 750 so I'm wondering if the part number changed for later models. Mine is off a K1.
McCabe-Thiele (Ted):
This item appears to supports Kens comments - cable at 10.00 O'clock hole at bottom.
.https://www.ebay.co.uk/itm/194253306652
Nurse Julie:
--- Quote from: McCabe-Thiele (Ted) on April 12, 2023, 06:02:38 PM ---This item appears to supports Kens comments - cable at 10.00 O'clock hole at bottom.
.https://www.ebay.co.uk/itm/194253306652
--- End quote ---
That's a very modern horn Ted as the bag has one of those fancy bar code scanning things (I can't remember what they are called now 😂😂😂). Anyways, the one on the K0 is an original K0 horn, not an up to date or superseded one. I've looked at the cover again and there isn't a hole in the bottom, only the one at about 9 o'clock with the cable entry at about 2 o'clock. It's exactly the same as the one I posted a photo of earlier from CMS for a UK K0 and it can't fit any other way, I've just tried 🤔🤔🤔
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version