SOHC.co.uk Forums > CB350/400

Which wire

(1/3) > >>

oldchuffer:
I need to make some fresh cables to the rear light cluster but i'm not sure which rating i will need. I saw the attached on the Vehicle Wiring Products website but which should i get?

sye:
It's only around 3A for the rear light cluster.

McCabe-Thiele (Ted):
Even less if you fit an LED - I would go for 3amp in stranded copper.

Oddjob:
You mean the 3 wire small harness? I should have a decent spare if you are. Just postage for a fellow old chuffer. I'll have a look, going into the loft now to check on something else so I'll see if I can find one.

oldchuffer:
I've checked the loom again (its off the bike completely) and i can see a plastic shroud which has the brown, green/yellow, light blue and orange (for the winkers) and several greens (earths?) The rear light has two, the green/yellow & brown but only about 4 inches of wire. Where abouts does this shroud sit?

Navigation

[0] Message Index

[#] Next page