SOHC.co.uk Forums > Project Board
400/4 build. Paused due to other commitments. But starting up again
ComfySofa:
Brilliant - glad i asked now (pics will be coming tomorrow when i get in the garage)! Many thanks.
McCabe-Thiele (Ted):
My cable was already bent into the shape shown but this is where it goes I believe - I made sure the inside surface against the engine made contact on both sides of the fram if you get my drift.
PXL_20221105_110348178 by Macabe Thiele, on Flickr
ComfySofa:
Wow.....ive not even got that bit on there yet!!! ( i was looking at that triangular bit last week) thinking where the #@%$ does that bit go!! Cheers....and i will add that ive got a few more bits like that as well (ill take some pics of them tomorrow)
Oddjob:
Supposed to point upward Ted and the cable should be straight not all curled up like that. I'm currently making some new ones for my bikes, red for the positive lead to the starter solenoid and black for the earth lead and the starter motor cable.
You can always trap the earth point between the engine bracket and the engine, so behind the bracket not in front, that way it makes a really good contact with the engine casing.
ComfySofa:
Great - thanks very much (all good stuff) i will say, that you lot have been a great help....one of the things i was most apprehensive about was the re-assembly after its been apart for so long....
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version