SOHC.co.uk Forums > Project Board

400/4 build. Paused due to other commitments. But starting up again

<< < (54/94) > >>

Bryanj:
Could be the float needles stuck, tap the bowls with the handle of a screwdriver to see if it shakes the needles/floate loose.
With the correct small screwdriver you can undo the screws holding the bowls on and as it wasnt too long ago they should undo to make sure floats are free and will cut fuel off when lifted

Trigger:

--- Quote from: McCabe-Thiele (Ted) on July 31, 2023, 11:35:12 AM ---
--- Quote from: ComfySofa on July 31, 2023, 10:52:35 AM ---That'd be great if you could (i could possibly get them on order today!) - thanks very much.

--- End quote ---

This invoice shows the ones I bought for my 500 as can't find my previous invoice - the SKU number shows the colour of the LED's

.LED's by Macabe Thiele, on Flickr

--- End quote ---

I fitted all LED to my silver 550, all of them blow within 6 month's . I even had to get Ash to make a box of tricks just to keep the LED on the number plate light. Now all back to standard bulbs apart from the number plate light  ;)

Laverdaroo:
This lot on Andy’s is through the M unit so they won’t blow as they would running through old Honda OEM wiring. It’s all new wires going on so shouldn’t have any issues with things going pop.


Sent from my iPhone using Tapatalk

ComfySofa:

--- Quote from: Bryanj on July 31, 2023, 01:04:04 PM ---Could be the float needles stuck, tap the bowls with the handle of a screwdriver to see if it shakes the needles/floate loose.
With the correct small screwdriver you can undo the screws holding the bowls on and as it wasnt too long ago they should undo to make sure floats are free and will cut fuel off when lifted

--- End quote ---
Hey Bryan! nice to hear from you....ill check that tonight! many thanks....its looking amazing by the way...i put the tank on last night temporarily to get it started.. that was a biggie for me...as it almost looks complete.!

Trigger:

--- Quote from: Laverdaroo on July 31, 2023, 01:17:24 PM ---This lot on Andy’s is through the M unit so they won’t blow as they would running through old Honda OEM wiring. It’s all new wires going on so shouldn’t have any issues with things going pop.


Sent from my iPhone using Tapatalk

--- End quote ---

Yes, i am aware of that Roo. But, other member do not. On my build i was advised by a member to put all LED's in and he reckoned they were the best thing since sliced bread. He knows who he is and forgot to mention that he had a M-unit and had upgraded every electrical component  :o 

Navigation

[0] Message Index

[#] Next page

[*] Previous page