SOHC.co.uk Forums > Project Board
400/4 build. Paused due to other commitments. But starting up again
Oddjob:
Enough metal on there to file them down to fit I’d say
McCabe-Thiele (Ted):
That's what I had to do juts used a cutter/saw, file etc to widen them up - no issues with clearing the petrol tank either.
ComfySofa:
Just about to say that....even with them as they the tank goes on fine...
Sent from my SM-G988B using Tapatalk
McCabe-Thiele (Ted):
Pretty sure that will foul the tank - worth seeing then if it catches - the top of the flat steel section needs to be almost flush with the top of the mountings iirc.
Update: Just read it clears so great! 😁
Looking at your picture you have the yellow wire for cylinders 2 & 3 on the left - thats fine if you have the HT leads accordingly I believe convention is Blue on the left for 1 & 4.
ComfySofa:
In the garage now....yep - blue is 1&4 - not that i knew that but i had a 50 50 chance of getting that right!! - yep - tank is definately ok... gonna check for a sparking now on all of the plugs...
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version