SOHC.co.uk Forums > CB350/400
400 fuel pipe fitting does it need a clip at the carb end?
K2-K6:
Or this ?
https://www.carbuilder.com/uk/self-clamping-double-wire-hose-clips
McCabe-Thiele (Ted):
Today having fitted a cable tie previously to the carb end of the pipe decided I would pull it off an try again to get a clip on the end - it was so firmly in place it would not shift so decided that it was a snug fit and left as is.
Fitted the pipe spring over the pipe so it went to the very end between the carbs - no clip fitted to the carb top as the spring is around 12 mm o/d so the original hose clamp will not fit. Happy with how it looks - short pipe fitted between the tap & the in-line filter all just out of casual sight.
Petrol tank & seat back in place so if the sun is out tomorrow I will go for a longer ride - after I have checked the ignition timing dynamically. Looking forwards to a longer ride now I have the riding gear sorted!
Oddjob:
Knowing your luck Ted, it's going to snow.
Laverdaroo:
--- Quote from: Oddjob on April 28, 2022, 11:50:03 PM ---Knowing your luck Ted, it's going to snow.
--- End quote ---
Yer miserable bugger Ken ;D ;D ;D
Navigation
[0] Message Index
[*] Previous page
Go to full version