SOHC.co.uk Forums > CB750
My F2 Rebuild
Bryanj:
Check valve stem to guide play, especially on exhaust side, as thats the BIG wear bug with F2/3
F2 Paul 876:
Thanks i will make shaw they are ok thanks for the pointer.
F2 Paul 876:
Just a quick up date, aim on Hols this week so have plans to get as much done as i can.Today i stripped the paint of the frame, next i shall sand the rust of the frame then paint it as the weather looks good for the rest of the week i should have this done by Sat i hope ??.
When i tried to take the main stand of i had a bit of a fight with it, could only get the pivot a small way out, so out came the anglegrinder and job done,looks like i had the same problem years ago as the part number is ticked in my parts book a look at the other bike and yes new pivot fitted.
More when i get it done.
Spitfire:
Making me feel guilty here as I should be painting up the rest of my F2 parts, did a load last year, but this fine weather has kinda snuck up on me !
Cheers
en
F2 Paul 876:
Hi not a lot done today, got the undercoat on the frame 2 large cans used. This could be the most paint thats been on the frame by the small amount i took of with paint stripper, and there is still the black to go hope to get this done by late Saturday.
The swinging arm is next striped it, now to de-rust it then paint.
The main stand is started a lot of rust on this should take me about a hour to sort it then paint.
The fumes are not as bad(or good) as the old paint and paint stripper used to be, our them where the days, only now have to watch out for spray that gets blown back over me as now my specks get covered only need them for reading and close work now did not have this prob last time i did a bike up in the last century>
Till next time
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version