SOHC.co.uk Forums > CB350/400

Number will not firer

(1/2) > >>

Harrier want to be:
I have changed the coil plug and cap but will number 2 won’t firer
When I take the plug out there is a spark
Any ideas please

Johnwebley:
Is the plug wet?


Check petrol in the float chamber,

Check the jets are clear in the carbs,

Try swapping one of the plugs that does work,

And fit the dead plug in that cylinder

Occasionally, you can get an iffy plug

Sent from my SM-A750FN using Tapatalk

Nurse Julie:
What type of plugs are you using? Are they all old or new? What type of plug caps are fitted? Swap the plugs as John suggested, if no different, do a compression test.

Harrier want to be:

--- Quote from: Johnwebley on May 22, 2022, 08:24:11 PM ---Is the plug wet?


Check petrol in the float chamber,

Check the jets are clear in the carbs,

Try swapping one of the plugs that does work,

And fit the dead plug in that cylinder

Occasionally, you can get an iffy plug

Sent from my SM-A750FN using Tapatalk



--- End quote ---
I have done all of the above , compression is good , plug is new , coil is new changed cap
Plug is wet ?

Johnwebley:

--- Quote from: Harrier want to be on May 22, 2022, 09:28:45 PM ---
--- Quote from: Johnwebley on May 22, 2022, 08:24:11 PM ---Is the plug wet?


Check petrol in the float chamber,

Check the jets are clear in the carbs,

Try swapping one of the plugs that does work,

And fit the dead plug in that cylinder

Occasionally, you can get an iffy plug

Sent from my SM-A750FN using Tapatalk



--- End quote ---
I have done all of the above , compression is good , plug is new , coil is new changed cap
Plug is wet ?

--- End quote ---
Wet with petrol,



Sent from my SM-A750FN using Tapatalk

Navigation

[0] Message Index

[#] Next page