SOHC.co.uk Forums > CB500/550
Top / bottom yoke race advice
Davelu88:
Hi No just captive ones
McCabe-Thiele (Ted):
This firm are pretty good for steering bearing kits - they supply good quality makes in my experience.
https://pyramid-parts.com/pages/steering-head-bearings-1
Post probably a bit late in the day as you have replacements.
Oddjob:
You sure you've not forgotten to put in the top race after the bearings go in? If it's moving up and down something is clearly missing. Most times it's people complaining about not enough room not too much.
Davelu88:
race in frame then bearings in that then race over stem then dust cover , if I put thick washer on the bottom I did not have enough thread at the top so left washer out so then I had plenty of thread but when tightening dust cover up to its max I still had up and down play . I wonder if I need a thin washer at the bottom ?
Bryanj:
Sounds like it, how thick is the thick washer?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version