SOHC.co.uk Forums > CB500/550

CB550F2 Build Update

(1/2) > >>

FlyinPhil:
Hello all,

Its been a while since I first introduced myself to the forum and shared my build so I just though I would share the with you all the latest photo's of my mild cafe 550F2 project.  I also wanted to encourage those who, like me, have zero experience in the restoration of motorcycles that through using the amazing resource such as this forum that you can get there, because trust me if I can you can!

I would also really appreciate some constructive criticism or feedback as to what you think so far, because as i said this is the first one I've attempted and I am essentially building my dream bike (with the exception of an RC30 or 45).  The bike hasn't been hacked about as most cafe bikes are and can still be returned to stock easily if needed.  I didn't want to go for a loudy, shouty style but more of an understated one which captures the best of both worlds.

The build is not far now from being rideable, having started just over a year ago, and all I have now is *just* the electrics and then getting the thing fired up!

Cheers
Phil

McCabe-Thiele (Ted):
That looks well tidy so far - the electrics on my 400 soon fell into place being easier than I thought although I used a new loom. Various wiring diagrams on here helped enormously.

philward:
Looking good Phil - looks a nice build you've done there for a 1st resto

FlyinPhil:
Thanks for the feedback guys, appreciate it.

And Ted yes I hope the electrics do go to plan as I've got a new loom too, and pilfered every wiring diagram and book I could from here, so fingers crossed! 👍

McCabe-Thiele (Ted):

--- Quote from: FlyinPhil on July 18, 2022, 06:22:19 PM ---Thanks for the feedback guys, appreciate it.

And Ted yes I hope the electrics do go to plan as I've got a new loom too, and pilfered every wiring diagram and book I could from here, so fingers crossed! 👍

--- End quote ---

As I had time on my hands during the cold weather I actually did an Excel spread sheet showing all the wiring loom colours on my 400 including if they were male or female - I then married this up with the various  electrical items on my bike - indicators, ignition horn, brake lights etc I eneded up with just a few unknowns to do with the horn, & clutch switch I think it was.
I found this generic Honda document useful when I had a few spare wires!
Plus of course advice on here.
If any 400 owners want a copy of my spreadsheets just PM me and I will e-mail them to you, My bike did not have the pass switch so slight adjustments were needed. On the plus side I did not blow any fuses except in my brain.

Navigation

[0] Message Index

[#] Next page