SOHC.co.uk Forums > Project Board
CB 500 resurrection
Oddjob:
Is the rotor really rusty?
McCabe-Thiele (Ted):
It definitely will not bed in - there should be no contact between rotor & stator.
gary123:
No not rusty at all.
Oddjob:
Dismantle and see where the wear marks are.
McCabe-Thiele (Ted):
Is it the right rotor for the engine & is it bolted up tight?
The stator is held in place with a series of 3 or 4 bolts into the housing.
Is it the correct housing & stator?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version